![]() If you install the torque arm on the motor cable side, you can slide the components over the motor plug easily. We chose to install on the motor cable side. If you’ve already tightened the wheel nuts it’s just a simple case of loosening off one of these and assembing as shown. ![]() 30-40Nm (250 - 350 in lbs).ĪRC Universal Torque arm The first step in installing the torque arm is to assemble the splinned pieces over the motor axle. Make sure you have the right size as to protect the nuts from being stripped. With these in place you can then tighten the axle nuts using a spanner or adjustable wrench. One torque washer should be fitted against the hub, on the inside of the forks (on each side) and then one flat washer on the outside. If the dropouts are not embeded firmly in the bottom of the drop out slots this could cause failure of the forks or cause the electric hub axle to become unsecure. Front Wheel Install With your bike upside down, your wheel should be pushed all the way down into the dropouts to make sure it’s a nice and tight fit.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |